I had the 2 corner holes I thought done, After putting the posts in, and measuring them I had to move each of them about 4 inches, ugh. That takes longer than drilling the original hole. First I put the auger in and angle it the direction I want to move it and jam it down, then move the tractor to 'straighten' the hole up. It doesn't work very well in this sandstone, the auger just moves at the bottom. I don't have power down on the 3 point, so it's a slow process to say the least. It is better than renting a bobcat however.
 

 

 

Master File: 2012OhlhWeb